中文版
  HOME ABOUT US PRODUCTS COMPANY NEWS APPLICATIONS FEEDBACK CONTACT US  
Product Catalog
PT(UV NDT LAMP)
UV LED NDT LAMP
HID UV NDT LAMP
UV-A Blacklight
UV Spare Parts
UT
Ultrasonic Flaw Detector
Ultrasonic Transducer/Accessory
Ultrasonic Test Block
Ultrasonic Thickness Gauge
Coating Thickness Gauge
Leeb Hardness Tester
Surface Roughness Gauge
Industrial Borescope
MT and RT
Magnetic Partical York & Accessory
X-ray Film Viewer
Densitometer
Radiation Dose Alarm
Leak Detection LAMP
Leak Detection LAMP
Fluorescent Dyes
Forensic Inspection
Forensic Light Source
Tactical Light
UV Testing Lab lamp
UV Testing Lamp
Surface Inspection Lamp
Fluorescence Excitation Light Source
Search:
UT - Coating Thickness Gauge

CTG10-F/N  Ultrasonic Portable Coating Thickness Gauge
CTG10-F/NCTG10-F/N Ultrasonic Portable Coating Thickness Gauge
CTG10-F/N  Ultrasonic Portable Coating Thickness Gauge 
Measuring Principle
Magnetic Method(Fe):
 Measuring the thickness of non-magnetic coatings on steel, iron and other ferro-magnetic metal substrates, e.g.painting,varieties of anti- corrosion coating,powder spraying,plastic,rubber,synthetic material,phosphate coating,
chromium,zinc,aluminum, thin and cadmium,etc


Eddy Current Method (NFe):

measuring the thickness of non-conductive coatings on copper, aluminum, stainless steel painting, varieties of anti-corrosion coating and other non-ferromagnetic substrates, e.g., powder spraying, plastic, rubber, synthetic
material, oxide film and phosphate film, etc.


CTG10F—Specification

Measuring Principle:Magnetic Method 

Measuring Principle (um) :P1(0~3000)
Low Range Sensitivity(um) :0.1
Tolerance:1-Point Calibration(um) :±(2%H+2) 
2-Point Calibration(um) :±((1~3)%H+1) 
Testing Condition:Min. Curvature Radius(mm):凸1.5 
Min. Measuring Surface(mm): 7
Min. Substrate Thickness(mm): 0.5
Display:High Contrast Segment Liquid(LED Backlight)
Statistics:N,MAX,MIN,MEAN and STD.DEV
Calibration:One-Point Calibration and Two-Point Calibration
Working Temperature:-10℃~+50℃,-20℃ in special requirement.
Auto Power-off:Auto off after 3 minutes of inactivity.
Power:Two 1.5V  AA batteries,low -voltage indication function.
Weight:200g including batteries
Size:149mm×73mm×32mm (H×W×D)


CTG10N—Specification:
Measuring Principle:Eddy Current Method
Measuring Range (um) :0~2000
Low Range Sensitivity (um) : 0.1
Tolerance:(um)  ±(2%H+2)  
Testing Condition:(mm): 3
Min. Measuring Suface(mm):5
min.Substrate Thickness(mm):  0.3
Display:Hight contrast Segment Liquid(LED backlight)
Statitics:N、MAX、MIN、MEAN、STD.DEV
Calibration:1-point Calibration、2-point Calibration
Working Temperature:-10℃~+50℃,-20℃ in special requirement
Auto Power-off:Auto off after 3 minutes of inactivity
Power:2 1.5V  AA batteries,low-voltage indication function
Weight:200g including batteries
Size:149mm×73mm×32mm (H×W×D)

Configuration

Standard Configuration:CTG10(N or F)  coating thickness gauge、probe、 Calibration foils、AL Zero Plate、Operating Manual、Packing List、Sealed Carrying Case

Optional Accessories:Calibration Foils 、AL Zero Plate、Fe Zero Plate、Rubber Sheath

HOMEABOUT USPRODUCTSCOMPANY NEWSAPPLICATIONFEEDBACKCONTACT USNOTICES
UV NDT LAMP,Ultrasonic Flaw Detector, Ultrasonic Thickness Gauge,Leeb Hardness Tester,UV HID NDT LAMP,UV testing lamp,UVA BLACKLIGHT,Ultrasonic Flaw Detector, Ultrasonic Thickness Gauge,Leeb Hardness Tester,Ultrasonic Flaw Detector, Ultrasonic Thickness Gauge,Leeb Hardness Tester
Copyright 2013 -2018 Hongkong Sunlonge Int'l Co.,Limited. All Right Reserved.